Epoxy Floors & Protective Coatings

Product Details:

• Direction for use: ŸBefore grouting, clean surfaces coming intocontactwithBONDITGROUT 700.
• All kinds of contaminations such as fat, oils, dust and cement slurry must be removed. 
• Advantages: It has excellent non shrink property. This volumestabilityensurespermanent contact with the bearing areas. 
• Areas of Application: Heavy duty machine foundations,Base plates and bolt pockets of turbo generators, Diesel generator sets, Cement,textile and papermill machinery, etc.

Product Details:

BONDIT COAT ZR is a two-part epoxy zinc rich primer for combating corrosion on steel structures. This consists of a Base and a Hardener
ADVANTAGES / BENIFITS
BONDIT COAT ZR gives permanent protection to steel structures against corrosion. BONDIT COAT ZR when used with steel structures can be welded or cut. BONDIT COAT ZR is easy to apply after sufficient curing.
 AREAS OF APPLICATION

• Exterior surfaces of machinery, petrochemical plants, tanks in fertilizer etc.
•  On reinforcement bars as a anti corrosive system- as a part of repair and rehabilitation procedure.
• For trusses, steel girders, steel stanchions in industries.

PRECAUTIONS
BONDIT COAT ZR should be applied using gloves. Splashes on to skin if any should be washed with plenty of water. When it comes in contact with eyes, wash with water and take medical advice.
TECHNICAL SUPPORT
Technical information and guidance regarding BONDIT range of admixtures, repairs and bonding, water proofing systems, epoxy industrial flooring systems etc., will be available from the technical s e r v i c e s d e p a r t m e n t , B O N D I T CONSTUCTION CHEMICALS PVTLTD

Product Details:

Description / Advantages:

Two component coaltar modified with epoxy resin system to stop the rusting and corrosion of all metal surfaces. Also a protective coating in any situation where heat radiation can causes damage to the substrates. It is immune to attacks by alkalinity or sulphides/ sulphates in the boiled water high adhesive strength, low shrinkage during curing. High resistant to most chemical environment.

Application:

• Used particularly in areas subjected to aggressive environments such as sewerage and effluent treatment plants.

How to use:

• Can be applied by spray, brush or roller after mixing the base and reactor thoroughly.