Exclusive Product Range

Product Details:

Description / Advantages:

It is a single component economical rust release for pre-treatment of iron. It cleans rust easily and also economical as itis water based.

Application:

• Used as cleaning agent for iron bars, MS sheets etc., Used as cleaning agent for iron bars for concrete spilling.

How to use:

• Apply by brush/spray and rub vigorously with wire brush after five minutes.

Product Details:

Description / Advantages:

It does not have sand, silt or mud which obstructs plastering & the plaster quality. With even quality, time saving & least rebound loss. Also water proof, rebound loss ready mix plaster applied walls are stronger, looks nice and binds betters its base.

Application:

• Inner/outer brick works, block & stone walls, plastering of sealing/roof, column beams and all concrete surfaces.

How to use:

• The surface should be free from dust, grease ,oil etc, if the surface is dry, it should be wetted with clean water.
• Prepare plaster by mixing water per every 40Kg bag. Use of mechanical mixer-electrical agitator is recommended for better results. Mixing should be done for 5-10 minutes depending upon the speed of the mixing equipment. After mixing the plaster, leave it for 5 minutes and mix it once again just before use. The correct ration of water and ready mix plaster is essential for good results. It should be applied after one hour of preparation. Surface should be rough and if it is smooth made rough with comb. For better stocking. Should be applied with hand trowel and shouldn't have direct exposure to wind and rain during its application

Product Details:

Description / Advantages:

Specially designed to provide stronger, much more durable bonding between the blocks with superior adhesive strength. It replaces conventional cement and sand mix mortar. It is self curing and no additional water curing is required.

Consumption / Coverage:

Under normal conditions of coverage approx. 12 sq.mt with an average thickness of 3mm per bag of 40 Kgs. (Block size 600x200x150mm)

Application:

Fly ash bricks, cement blocks, hollow blocks, AAC blocks, pre stressed concrete slabs, panels/parapet walls/jointing of cement windows and door frames/ garden boundary walls

How to use:

The surface of masonry units should be slightly wet prior to application of block bond.

Apply a thin uniform layer of Bondit block bond, 3- 4mm thick,on the clean & leveled surface of masonry units using proper trowel. After placing the first units apply bondit block bond of same thickness on both sides of the unit, keeping continuous checks for the line and level

Price: 475/40 Kg

Product Details:

Description / Advantages:

Tuff seal is a premium grade two part polysulphate sealent. It has excellent weathering characteristics with resistance to rain, snow, heat and ultraviolet light. It is quick in covering with low shrinkage.

Application:

• Tuff seal sealents are used for the hight performance in sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction material like glass, aluminium, steel, cladding, glazing tilling, tanks internal water retaining structures.

How to use:

• Clean surface of the joints with wire brush or cloth for all surfaces. Apply BONDIT TUFF PRIME with brush insert a back up strip in the joint to the required depth by means of a shaped piece, pour the mix A&B with a powered paddle till all uniform closer is obtained, fill the gun, fill the joint by means of the special using uniform amount of force till the joint by means of a putty knife to remove air bubbles and to fill the joint fully

Product Details:

Description / Advantages:

It is a two component water based epoxy coating system with food grade properties. Anti-fungal nature of coating helps maintain water quality (free from harm-full bacteria) When applied develops high hardness and abrasion resistance with good viscous elasticity. Forms thick layer and with stands negative water pressure after application.

Application:

• Used as well as water tanks & floor coating on surfaces which are chemically and mechanically loaded as well as in nuclear power stations with good decontamination properties.

How to use:

• Mix base and reactor thoroughly with mechanical stirrer at n RPM of 300 to 350, after that it can be applied by standard paint brush or roller.

Additional Information:

• Delivery Time: 2 days