New Items

Description / Advantages:

An acrylic modified single component flexible coating in thixotropic consistency

Application:

• Can be used over cracks when its width ranges with 0.5mm and 1.5mm also as coating in terrace water proofing.

How to use:

• The surface over which the materials are to be applied should be free from dust, grease, oil etc.

Product Details:

Description / Advantages:

It is a two component low Viscosity Epoxy Resin Injection Grout. It has very high flow ability and excellent bond strength.

Application:

• It can be applied as crack injection and for filling cold joints. It can also be used for filing base plates and bolt pockets with gap less than 10 mm.

How to use:

• Mix base & reactor thoroughly & see that the mixed material is injected well.

Product Details:

Description / Advantages:

Tuff seal is a premium grade two part polysulphate sealent. It has excellent weathering characteristics with resistance to rain, snow, heat and ultraviolet light. It is quick in covering with low shrinkage.

Application:

• Tuff seal sealents are used for the hight performance in sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction material like glass, aluminium, steel, cladding, glazing tilling, tanks internal water retaining structures.

How to use:

• Clean surface of the joints with wire brush or cloth for all surfaces. Apply BONDIT TUFF PRIME with brush insert a back up strip in the joint to the required depth by means of a shaped piece, pour the mix A&B with a powered paddle till all uniform closer is obtained, fill the gun, fill the joint by means of the special using uniform amount of force till the joint by means of a putty knife to remove air bubbles and to fill the joint fully

• Cementations surface sealing's, crystalline water proofing systems. Penetrates deeply in to the concrete, Forms — crystals, which block capillaries. Can resist water pressure up to 70m water column as per DIN — 1408 Easy to apply Can be used in moist surface Free from chlorides and Sulphates. Allows breathing.

Application:

• Water tanks, Swimming pools, Bathrooms, retaining walls, water treatment plants, water holding structures.

How to use:

• 6.5 to 7.0 litres of water to be mixed for 25 kg pack. Mix till a uniform smooth paste is achieved. Apply with a brush on a moist surface; curing is must to obtain best results.

Product Details:

Description / Advantages:

Silicon resin Based colourless water repellent. Penetrates deeply beneath the surface and forms a barrier in the capillary channels. Preventing rainwater penetration and helps to keep the surface clean algae, fungus free, and dust free. Prevents dampness on the interior surface. Does not effect the exterior colour Clear coat and non staining. Prevents efflorescence, u/v stability etc. Excellent water repellent. Does not affect breathing properties.

Application:

• Exterior cement, painted surfaces, External Brick work, concrete renderings, natural and artificial stone work.

How to use:

• Surface should be free from dust, wax oil, grease, and moisture, always apply on a bone dry surface. No need to add water. To be applied either by brush or spray. Efflorescence should be removed using a wire brush. Cracks which are slightly large should be sealed and allowed to dry before applying Bondit Repel SB.