Water Proofing Compounds

Product Details:

Description / Advantages:

• Cementations surface sealing's, crystalline water proofing systems. Penetrates deeply in to the concrete, Forms — crystals, which block capillaries. Can resist water pressure up to 70m water column as per DIN — 1408 Easy to apply Can be used in moist surface Free from chlorides and Sulphates. Allows breathing.

Application:

• Water tanks, Swimming pools, Bathrooms, retaining walls, water treatment plants, water holding structures.

How to use:

• 6.5 to 7.0 litres of water to be mixed for 25 kg pack. Mix till a uniform smooth paste is achieved. Apply with a brush on a moist surface; curing is must to obtain best results.

Price: 1926.41/25 L

Product Details:

Description / Advantages:

Two component High performance elastomeric cementitious flexible sealing coat, to be used against ground and back Water based on modified acrylic polymer emulsion. Gives excellent waterproofing & UV resistance. Good adhesion on cementitious surfaces. Flexible in nature, can with stand expansion & contractions. Allows breathing.

Application:

• Terrace, Bathrooms, wash Areas, water Tanks, Swimming pools, retaining walls, Basement's Exterior and interior walls.

How to use:

• Pour liquid into a container Add 10% of water (i.e 3lt's for 20kg pack) and mix slowly with slow speed drill. Add powder to the above mix in small quantities to obtain smooth and uniform paste. On wet surface apply with brush or roller. Keep stirring the mixed material to avoid setting. Apply second coat after 4-6 hours. For protection against physical damage, a mortar screed may be provided.

Price: 2138.67/20 Kg

Product Details:

Description / Advantages :Plasticizing liquid integral water proofingcompoundBeing a liquid it disperses instantly with gaugingwater. Improves strength through reduction ofwater content. Improves workability cohesivenessof mortar & minimises shrinkage cracks. Does notaffect the setting time. Chloride free, hence noeffect on concrete.Application :Roof slabs, retaining wall & Cement mortar, Basementraft, sunken slabs, water tanks, Bathroomswash areas etc.Consumption / Coverage:100ml per 50kg cementHow to use:To be mixed with dosing water.Pack Size:100 ml, ½, 1, 5, 20 and 240 Kg.

Additional Information:

• Production Capacity: 100ml per 50Kg cement
• Delivery Time: 2 days

Product Details:

Description / Advantages:Higher Performance Integral powder waterproofing Compound. Economical in application.Chloride free, hence no effect on concrete. Has aneffect on concrete& an effective pore filler, helps toreduce capillaries and pores to prevent waterseepage. Improves cohesiveness, minimisesshrinkage cracks.Application:Basement, roof slabs, cement mortar, retainingwall, sunken slabs, Bathroom, wash areas, high risebuildings and canal lining slip from structures etc.Consumption / Coverage:1 kg per 50 kg cement.How to use:Sprinkle the powder and mix thoroughly withcement, sand aggregates. Add the normal dosageof water and mix to completion.Pack Size:1 kg and 25 kg

Additional Information:

• Production Capacity: 1kg per 50 kgs cement bag
• Delivery Time: 2 days

Product Details:

Description / Advantages:

An acrylic modified single component flexible coating in thixotropic consistency

Application:

• Can be used over cracks when its width ranges with 0.5mm and 1.5mm also as coating in terrace water proofing.

How to use:

• The surface over which the materials are to be applied should be free from dust, grease, oil etc.

Price: 5104.01/20 L

Product Details:

Description / Advantages:

Silicon resin Based colourless water repellent. Penetrates deeply beneath the surface and forms a barrier in the capillary channels. Preventing rainwater penetration and helps to keep the surface clean algae, fungus free, and dust free. Prevents dampness on the interior surface. Does not effect the exterior colour Clear coat and non staining. Prevents efflorescence, u/v stability etc. Excellent water repellent. Does not affect breathing properties.

Application:

• Exterior cement, painted surfaces, External Brick work, concrete renderings, natural and artificial stone work.

How to use:

• Surface should be free from dust, wax oil, grease, and moisture, always apply on a bone dry surface. No need to add water. To be applied either by brush or spray. Efflorescence should be removed using a wire brush. Cracks which are slightly large should be sealed and allowed to dry before applying Bondit Repel SB.

Price: 5104.01/20 L